|
|
|
|
|
|
Thermal Dynamics Auto-Cut 100 Systems
|
Starting at: $8,000.00
|
|
|
"Auto-Cut™ 100 systems with the XT-301 torch deliver conventional production capacity of 5/8"" (15mm) at 100% duty at up to 100 amps. Material up to 1” (25mm) may be cut when starting from the edge of the plate. Auto-Cut 100 systems use the Multi Gas, 100% duty cycle, liquid cooled XT-301 180 degree torch with a 2"" (50mm) diameter fiberglass mounting tube. Systems also include the integrated GCM-1000 gas control for easy parameter setup and precise delivery of gases.
A CNC connection on the rear of the power supply provides access to Start/Stop and ""OK to Move"". A divided arc voltage signal for controlling a torch height control is also provided. Full arc voltage is available inside the power supply."
We have many options and configurations available. Please call one of our salespeople to determine which system is best for you.
775-673-2200
Thank you!
|
|
|
|
|
|
|
|
|
|
Thermal Dynamics Auto-Cut 200 Systems
|
|
Starting at: $12,000.00
|
|
|
Auto-Cut 200 systems with the XT™-301 torch deliver conventional production capacity of 1" (25mm) at 100% Duty Cycle at up to 200 Amps. Material up to 2” (50mm) may be cut when starting from the edge of the plate. Auto-Cut 200 systems use the Multi-Gas, 100% Duty Cycle, liquid-cooled XT-301 180 degree torch with a 2" (50mm) diameter fiberglass mounting tube. Systems also include the integrated GCM-1000 gas control for easy parameter setup and precise delivery of gases. A CNC connection on the rear of the power supply provides access to Start/Stop and "OK to Move". A divided arc voltage signal for controlling a torch height control is also provided. Full arc voltage is available inside the power supply.
We have many options and configurations available. Please call one of our salespeople to determine which system is best for you.
775-673-2200
Thank you!
|
|
|
|
|
|
|
|
|
|
Thermal Dynamics Auto-Cut 300 Systems
|
|
Starting at: $18,000.00
|
|
|
Auto-Cut™ 300 systems with the XT-301 torch deliver conventional production capacity of 1.25" (30mm) at 100% duty at 300 amps with a maximum pierce capacity of 1.5" (40mm). Material up to 2.75” (70mm) may be cut when starting from the edge of the plate. Auto-Cut 300 systems use the Multi Gas, 100% duty cycle, liquid cooled XT-301 180 degree torch with a 2" (50mm) diameter fiberglass mounting tube. Systems also include the integrated GCM-1000 gas control for easy parameter setup and precise delivery of gases. A CNC connection on the rear of the power supply provides access to Start/Stop and "OK to Move". A divided arc voltage signal for controlling a torch height control is also provided. Full arc voltage is available inside the power supply. For systems where more than 50 ft. torch leads are required a Remote Arc Starter (RAS) is available.
We have many options and configurations available. Please call one of our salespeople to determine which system is best for you.
775-673-2200
Thank you!
|
|
|
|
|
|
|
|
|
|
Thermal Dynamics Auto-Cut 200-O2 Systems
|
|
Starting at: $14,000.00
|
|
|
Auto-Cut 2002 systems with the XT™-301 torch deliver production capacity of 1" (25mm) at 100% Duty Cycle at up to 200 Amps. Material up to 2” (50 mm) may be cut when starting from the edge of the plate. Auto-Cut™ 2002 systems use the Multi-Gas, 100% Duty Cycle, liquid-cooled XT-301 180 degree torch with a 2" (50mm) diameter fiberglass mounting tube. Systems also include the GCM-2000 gas control for easy parameter setup and precise delivery of gases. A CNC connection on the rear of the power supply provides access to Start/Stop and "OK to Move". A divided arc voltage signal for controlling a torch height control is also provided. Full arc voltage is available inside the power supply.
We have many options and configurations available. Please call one of our salespeople to determine which system is best for you.
775-673-2200
Thank you!
|
|
|
|
|
|
|
|
|
|
Thermal Dynamics Ultra-Cut 100 Systems
|
|
Starting at: $10,500.00
|
|
|
"Ultra-Cut™ 100 systems with the XT-300 torch deliver high defintion production capacity of 1/2"" (12mm) at 100% duty at up to 100 amps. Material up to 1” (25 mm) may be cut when starting from the edge of the plate. Ultra-Cut 100 systems use the Multi Gas, 100% duty cycle, liquid cooled XT-300 180 degree torch with a 2"" (50mm) diameter fiberglass mounting tube. Systems also include the digital GCM-2010 gas control for easy parameter setup and precise delivery of gases.
A CNC connection on the rear of the power supply provides access to Start/Stop and ""OK to Move"". A divided arc voltage signal for controlling a torch height control is also provided. Full arc voltage is available inside the power supply."
We have many options and configurations available. Please call one of our salespeople to determine which system is best for you.
775-673-2200
Thank you!
|
|
|
|
|
|
|
|
|
|
Thermal Dynamics Ultra-Cut 300 Systems
|
|
Starting at: $30,500.00
|
|
|
Ultra-Cut™ 300 systems with the XT-300 torch deliver high defintion production capacity of 1.25" (32mm) at 100% duty at up to 300 amps. Material up to 2.5” (38mm) may be cut when starting from the edge of the plate. Ultra-Cut 300 systems use the multi-gas, 100% duty cycle, liquid cooled XT-300 180 degree torch with a 2" (50mm) diameter fiberglass mounting tube. Systems also include the digital GCM-2010 gas control for easy parameter setup and precise delivery of gases. A CNC connection on the rear of the power supply provides access to Start/Stop and "OK to Move". A divided arc voltage signal for controlling a torch height control is also provided. Full arc voltage is available inside the power supply.
We have many options and configurations available. Please call one of our salespeople to determine which system is best for you.
775-673-2200
Thank you!
|
|
|
|
